home
>
news
>
details

Drywall Screw

· Updated

Drywall screws are often overlooked as insignificant small accessories during renovations, with people simply choosing a few boxes and sending them to the construction site. However, few people know that these small fasteners directly determine the stability of gypsum board partitions and ceilings. Inferior products can even pose safety hazards such as board detachment and wall cracks. Today, we will thoroughly explain the practical knowledge of drywall screws, from selection to installation and avoiding pitfalls.

Understand drywall screws:

It's not just a "screw" that's so simple. The name of the drywall screw is directly translated from the English term "Drywall Screw". Its most iconic appearance is the trumpet head shape, which allows the nail head to be completely embedded into the plasterboard after being screwed in, without affecting subsequent mesh taping or puttying  
The two most common types of drywall nails on the market have completely different application scenarios:

Double-threaded fine-pitch drywall screws: With a double-threaded design, they are suitable for connecting gypsum boards and metal joists with a thickness of up to 0.8mm. They are the mainstream choice for home decoration with light steel joist partitions.

Single-thread coarse pitch drywall screws: With wider threads, they won't damage the wooden structure when screwed into wood. They are specifically designed for fixing gypsum boards and wooden joists, offering faster drilling speed and stronger grip. Additionally, there are self-drilling drywall screws that can complete drilling, tapping, and fastening in one go. They are suitable for metal joists with a thickness of up to 2.3mm, significantly improving construction efficiency.

Choose the right drywall nails and avoid these common pitfalls

Many people only consider the price when choosing drywall nails, but in the end, problems often arise on the construction site. Remember these key points for selection, and you will basically avoid falling into traps:

Observe the tip: The angle of a qualified drywall nail tip should be controlled between 22 and 26 degrees. The tip should be full and free from burrs, without cracking. It should be able to quickly drill through the board without the need for pre-drilling. Poor-quality nail tips are blunt, and they are prone to getting stuck and not turning when screwing light steel joists.

Observing the plating: The black phosphate drywall screws are inherently lubricious, ensuring faster screwing-in speed; the blue-white zinc and yellow zinc variants offer stronger rust-resistant performance, making them less prone to rusting and yellow stains on the wall surface when used in wet areas such as kitchens and bathrooms.

Look at the material: Priority should be given to products made of hardened carbon steel, with a surface hardness of HRC53 or higher, ensuring that the screw is not easily broken when tightened. For scenarios with sufficient budget, 304 stainless steel models can also be considered, offering more stable corrosion resistance for long-term use.

Check the length: The length of the drywall screw should be slightly greater than the combined thickness of the gypsum board and the joist, to ensure full engagement with the joist. Do not choose a model that is too short to save costs, as this can easily lead to issues such as loose fixation and board detachment.

Install correctly to allow the drywall screws to perform at 100% capacity

No matter how good the drywall nails are, if the installation method is incorrect, all the effort will be in vain. Remember these details during home decoration construction:

The nail position should be at least 13mm away from the edge of the gypsum board. Do not nail at the corners of the board to avoid chipping and cracking of the gypsum board. Control the screwing depth so that the nail head just sinks 1~2mm into the surface of the gypsum board. Do not screw it in too hard, otherwise it will damage the core of the gypsum board and significantly weaken the fixing force.

The nail spacing should be maintained at approximately 20cm at the edges and 30cm in the middle of the board, with nails evenly distributed. Do not drive the screws at an angle ,so that the entire gypsum board is evenly stressed.

When using an electric screwdriver for construction, adjust the torque and rotation speed in advance to avoid shearing the screw shank under excessive torque, and also to reduce the possibility of puncturing the board.

Many people always believe that it is the large items such as boards and paints that determine the quality of decoration, but it is precisely the small accessories hidden in the wall, such as drywall screws, that silently bear the weight of the entire partition wall and ceiling. Choosing a qualified drywall screw and installing it properly can ensure that the partition wall and ceiling in your home remain stable and secure for ten or twenty years, without experiencing troublesome issues such as loosening or cracking.