Geogrid
Description
Uniaxial Geogrid is a type of geosynthetic reinforcement material manufactured from PE or polypropylene (PP). It is produced through a process of extrusion, punching, and uniaxial stretching, which aligns the polymer molecules in a linear direction. This orientation results in high tensile strength and low elongation along the longitudinal axis, while maintaining flexibility in the transverse direction. It is primarily used to reinforce soil structures such as steep slopes, embankments, and retaining walls by transferring loads through interlock with the surrounding fill material.
Specification
PP Unixial Geogrid:Tensile Strength(kn/m) 35/50/80/120/160/200/260
PE Unixial Geogrid:Tensile Strength(kn/m) 35/50/80/120/160/200
Size:Width ≤2.5m,Length 50~100m,or as client’s request
Properties
High Strength,good flexibility,anti-aging,resisting acid and Alkaline
Application
Make reinforcement for various kinds of soil foundation enhance and improve
bearing ability of roaded.
Make reinforcement for retaining wall,steep slop,dam and bridge abutment under stress status for long term thus to improve quality and prolong service life of project.
Bixial geogrid
PP Biaxial Geogrid
Description
PP biaxial geogrid is manufactured from Polypropylene, the geogrid is extruded and pressed, and then punched with regular hole mesh, and then stretched vertically.
Specification
| Product NamePP Biaxial Extruded Geogrid | |
| Tensile Strength | 15/15, 16/16, 20/20, 25/25, 30/30, 40/40, 50/50kN/m |
| Mesh Size | 38×38, 50×50mm |
| Color | Black |
| Roll Width | 3.95 or 5.95 m |
| Roll Length | 50 or 75 m |
| Standard | CE, ASTM, ISO, GB |
| Packing | In rolls, with woven bag outside |
Warranty: More than 5 years
Application
Biaxial geogrid is mainly applied in strengthening soft ground of highway, railway, slope protecting projects, airfields etc. It can increase stability and loading capacity of foundation, prolong the project life.
Improve roadbed bearing capacity, enlarge road lifetime
Prevent road collapse and crack
Prevent soil and water loss in slope
Could replace steel-plastic geogrid in coal mine
Fiberglass Biaxial Geogrid
Description
Fiberglass geogrid is knitted by glass fiber filaments and coated with bitumen to provide a good bond with the asphalt layers, can strengthen the asphalt layer, extend the service life to pavement layers, and decrease the occurrence rate of reflective cracking under cyclic traffic load.The fiberglass geogrid is widely used in asphalt pavement and cement concrete pavement, It can be applied to both hard and flexible pavement. It is a new excellent geotechnical material for pavement reinforcement. Practice has proved that the pavement treated with glass fiber geogrid can reduce the cost, prolong the life, and reduce road reflection cracks compared with the traditional pavement.
Specification
| Product Name | Fiberglass Geogrid |
| Tensile Strength | 50/50 100/100 120/120 kN/m |
| Mesh Size | 25.4x25.4, 12.5x12.5mm |
| Roll Width | 1.5/2/2.5/3.95/5.95m |
| Roll Length | 50/100 m, etc. |
| Standard | ASTM, ISO, CE |
| Packing | In rolls, with woven bag outside. |
Application
Strengthen bitumen concrete roadway and reduce and prevent various kinds of reflection gaps on roadway.
1.Suitable for highway, railway, airport road of subgrade enhancement.
2.Suitable for the large parking lot and port freight yard that the foundations of the permanent load increased.
3.Suitable for railway, highway slope protection.
4.Suitable for culverts.
5.Suitable for the uniaxial tensile geogrid reinforced soil secondary enhancement, after further enhance soil, prevent soil erosion.
6.Mining, tunnel reinforcement.
Product Use
- Make reinforcement for various kinds of soil foundation enhance and improve bearing ability of roaded.
- Make reinforcement for retaining wall,steep slop,dam and bridge abutment under stress status for long term thus to improve quality and prolong service life of project.
- Biaxial geogrid is mainly applied in strengthening soft ground of highway, railway, slope protecting projects, airfields etc. It can increase stability and loading capacity of foundation, prolong the project life.
- Improve roadbed bearing capacity, enlarge road lifetime
- Prevent road collapse and crack
- Prevent soil and water loss in slope
- Could replace steel-plastic geogrid in coal mine
- Suitable for highway, railway, airport road of subgrade enhancement.
- Suitable for the large parking lot and port freight yard that the foundations of the permanent load increased.
- Suitable for railway, highway slope protection.
- Suitable for culverts.
- Suitable for the uniaxial tensile geogrid reinforced soil secondary enhancement, after further enhance soil, prevent soil erosion.
- Mining, tunnel reinforcement.
